VERTICAL
STENTER FRAME
Model RV
A stenter with
vertical circulation chain for quality finishing of knitwear, lycras and lightweight
fabrics.
Independent fabric transport chain at each side giving the possibility of a
differential effect.
Fabric transport by means of pins.
Speed from 0 to 150 metres/min.
Principal technical
details:
- Chamber
ventilating fans driven by standard a.c. motors with variable speed through
converters or inverters. Result: energy savings and versatile operation. The
motors consume just the energy needed at any particular moment.
- The same
technology applies to the extractor fans, with the same results regarding
savings and operation.
- All other
motors on the machine are a.c. and direct drive. Chains, belts and gears have
been eliminated to avoid slipping, tensioners and lubricants, giving maximum
performance in all mechanical operations.
- The chamber
spindles are driven by motors which allow variations in chain width inside
the chamber, independently for each field. Operation is electronically controlled
by a programmed automaton, which supervises all electrical controls to prevent
chain damage through possible excess coning. All handling operations may be
totally or partially controlled via the cockpit control panel.
- Filter system
which may be removed from outside the chamber for cleaning without machine
stoppage, thus increasing drying production and performance.
- Mechanism
to prevent fabric becoming unpinned, allowing maximum performance of lower
nozzles.
- Heating
system to the customer’s choice: gas (1 or 2 burners), fuel oil, steam
or electricity.
- By-pass
for each ventilator with air shut-off to nozzles when the machine is stopped,
avoiding marks on the fabric and stopping the fan motors.
- Optional
programmable PC with memory capacity for all working parameters such as: temperature
in each field, chain speed, extraction, spindle-chain width, etc, which may
be recovered and reproduced via a code.
- Personalised
machine exits such as: contact winders for large rolls (beam truck) with independent
electronic drive, tension control and pressure regulation, high-arm folder
(folding device), special exits for knitwear, rising winding, non-stop, etc.
NEW
FEATURES STENTER:
- (Optional) New system
of circulation air, independet in superior nozzles and inferior nozzles, assuring
a smooth shock of air on the fabric. Fans has a speed control by Micromasters
SIEMENS.
- (Optional) Programmable
touch screen that allows to control the machine movement through the different
menus and submenus. It allows to control the temperature in each compartiment,
wide, spindle-chain, fan speed, termofixation, alarms etc.
- (Optional) Sensor for
measurement the web temperature (Termaset) inside the chamber, measure the
temperature of the edges of the fabric whithout contact and regulate automatically
the speed of the machine. Its reach is until 250º C.
Please
send form us for further information.